5
Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least four times that of the TV.
Dry wall with studs
Note
Pilot holes must be drilled to a depth of 75 mm, using
a 5.5 mm diameter drill bit.
Solid Concrete or Concrete Block
75 mm
5.5 mm
Stud or Reinforcement
75 mm
10 mm
− 10 (GB) −
6
Install the Base (20) on the
wall using suitable screws (not
supplied).
Note
Use four or more screws of 8 mm diameter or
equivalent (not supplied).
Use a level to check whether the Base (20) is level.
Fit four screws to the holes of Base Adaptor
with Base (20) (2-a only).
2-a
2-b