Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance and care
Observe the following precautions when checking and maintaining your product after use:
Turn the engine off and do not attempt to check or maintain the product until the engine has cooled.
You could burn yourself.
Remove the spark plug cap before performing checks and maintenance.
An accident could occur if the product starts unexpectedly.
Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
Servicing guideline
Area
Spray system
Air filter
Fuel filter
Spark plug
Carburettor
Cooling system
Silencer
Starter
Fuel system
Screws, bolts and nuts
Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.
Record dates of monthly and yearly inspections.
It is not necessary to apply grease/oil to pump.
Maintenance and care
If you have any questions or problems, please contact your dealer.
check leakage of spray system
IMPORTANT
Maintenance
Inspect
Clean/Replace
Inspect/Clean/Replace
Inspect/Clean/Adjust/Replace
Inspect/Replace and adjust
Inspect/Clean
Inspect/Tighten/Clean
Inspect
Inspect
Inspect, Tighten/Replace
IMPORTANT
Maintenance and care
WARNING
Page
Before use
16
17
17
18
17
18
18
-
18
-
NOTE
1.
Close the liquid valve.
2.
Put approximately 5 liters of water in the chemical tank.
3.
Secure the chemical tank cap.
4.
Check the connection between the spray hose, grip, liquid
valve, nozzle pipe, and nozzle to the nipple.
5.
Start and warm up the engine.
6.
Raise the engine speed and confirm if no water leakage is
occurring.
7.
If there is leakage, consult your dealer.
16
Monthly
•
•
•
•
•
•
•
•
•
Yearly
•
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
