Inputs - CAME TS07 Bedienungsanleitung

Contents
PANEL PXC48 > Inputs
Input 01
Input 02
Input 03
Garden sensor 04
Garden sensor 05
PIR input 06
PIR input 07
06:13
Wednesday 01 March 2017
1
PANEL PXC48 > Insert all inputs
Input 01
Input 02
Input 03
Garden sensor 04
Garden sensor 05
PIR input 06
PIR input 07
06:13
Wednesday 01 March 2017
2
Home Back
Included Excluded
Included Excluded
Included Excluded
Included Excluded
Included Excluded
Included Excluded
Included Excluded
Home Back

Inputs

This screen 1 shows the status of all of the system inputs, independently of the area they
belong to .
If an authentication code is not entered, only the status of the inputs can be viewed .
Insertion
Input included (if open, it triggers an alarm) .
Input excluded (if open, it does NOT trigger an alarm) .
Input open (not ready) .
Input closed (ready) .
No alarm in progress .
Alarm in progress .
The icon is replicated at the top right of all of the pages on the terminal; select to access the
security section directly .
No fault detected .
Settings
Fault detected .
There is a video camera at the input . Tap the icon to show the live video images .
A sensor with a camera is connected at the input and can be used to take photographs
A
where activated; tap this icon to take a photograph . The image is then available in the video
check menu .
Exclude
opened inputs
☞ Taking an image by tapping the icon is only possible where the area the sensor
belongs to is inserted.
B
Apply the
changes
Tap the inserting button and enter a valid activation code to insert/disarm the inputs 2 .
C
A Exclude any open inputs (
Cancel B Apply the changes to the configuration without logging out .
changes
C Cancel the changes to the configuration without logging out .
D
D Log out; to make additional changes you need to log back in again .
Logout
☞ The changes to the status of the inputs remains effective until a new configuration is
entered on this same page.
Settings
) .