Automatic Mode; Creating A Daily Temperature Diagram; Copying A Temperature Diagram To Other Days Of The Week - CAME TS07 Bedienungsanleitung

Contents
Thermal zones
Bedrooms
Mon Tues Wed
Copy
Thermo mode:
automatic
06:13
Wednesday 01 March 2017
3
Name of the Thermal Zone
Current day
Hours of the day axis
Axis of the reference temperatures
(T1 - T2 - T3)
Active mode
Thurs Fri Sat Sun All-purpose
Paste
Internal temperature:
28.2°C
Winter
Home Back
Thermal zones
Bedrooms
Mon Tues Wed
Copy
Thermo mode:
automatic
06:13
Wednesday 01 March 2017
4

Automatic mode

By moving the selector switch G 2 to [AUTO], the thermal zone is controlled by
an automatic weekly program .
Diagram 3 shows the temperature trend set for the thermal zone displayed .

Creating a daily temperature diagram

Save
On the top bar select the day of the week that you want to program and mark the
temperature/times trend you want on the diagram . Tap button I to display the
time axis divided into quarters of an hour to fine-tune the programming; tap the
button again to go back to the standard display .
Lastly, tap the [Save] button .

Copying a temperature diagram to other days of the week

Select the day of the week from which you want to copy the diagram and then tap
[Copy]; select the day of the week to which you want to paste the diagram and
I
tap [Paste] .
☞ The diagram that has been copied can be pasted into more than one day
of the week.
Settings
Thurs Fri Sat Sun All-purpose
Paste
Internal temperature:
28.2°C
Winter
Home Back
Days of the week; highlighting shows
the day of the week for which
Save
Settings
the diagram is displayed
Current time
Current active season