Areas; Displaying The Status Of The Areas; Inserting One Or More Areas Of The System - CAME TS07 Bedienungsanleitung

Contents
PANEL PXC48 > Areas
Perimeter
Kitchen
Bathrooms
Bedrooms
06:13
Wednesday 01 March 2017
1
PANEL PXC48 > Inserting areas
Perimeter
Kitchen
Bathrooms
Bedrooms
06:13
Wednesday 01 March 2017
2
Full disarm
A
insertion
Home Back Settings
Full disarm
B
Apply
changes
C
Cancel
changes
D
Logout
Home Back Settings

Areas

Displaying the status of the areas

This screen lets you view all the areas the security system has been divided into .
If an authentication code is not entered only the status of the areas and the inputs they are
made up of can be viewed .
At least one of the area sensors (inputs) is open .
No area input is open .
At least one of the area sensors (inputs) is excluded .
Area not inserted .
Area partly inserted .
Area fully inserted .
No alarm in progress in the area .
Alarm in progress in the area .

Inserting one or more areas of the system

Tap the icon A, 1.
Enter your activation code to access the screen 2; the
logged in .
Select the type of activation to be applied to each area .
Do not insert the area .
Insert the area without respecting the exit time .
Insert the area respecting the exit time .
B Apply the changes to the configuration and start inserting .
C Cancel the changes to the configuration without logging out .
D Cancel the changes to the configuration and log out; to make new activations, log in
again .
icon indicates that you have been