Security Maps - CAME TS07 Bedienungsanleitung

PANEL PXC48 > Smith house
Garage 6
Garage 6 Bedroom 3
A
Kitchen 1 Living room 2
06:13
Wednesday 01 March 2017
1

Security maps

The division of the system into areas can also be displayed in maps mode .
If no inserting/disarming operation is started, only the status of the areas and the inputs they are made
up of can be viewed .
Area colour Area status
Blue Area not inserted
Yellow One or more inputs in the area are open . The area is NOT ready for inserting
Green Area inserted
Red Alarm in progress
In example 1, the main plan also shows the icons for scenarios that can be launched simply by tapping
them, and an icon for the system video camera; tap to view the recorded images .
Disarming
Going out
Bedroom 4
Going to bed
Insertion
Staying at home
Garden 5
Home Back Settings
The icons in column A show the system status .
At least one of the system's sensors (inputs) is open .
No input is open and the control unit is ready to be inserted .
Total
At least one of the system's sensors (inputs) is excluded .
B
System not inserted .
System partially inserted .
System fully inserted .
No alarm in progress .
Alarm in progress .
The icon is replicated at the top right of all of the pages on the terminal; select to access the
security section directly .
No fault detected .
Fault detected .
Press the status icons to access the related pages and easily identify the source of
☞
alarms or faults.
After inserting, it shows that the exit time is running down .
An invalid access code has been entered .
Contents