Technical Alarms - CAME TS07 Bedienungsanleitung

Loads control Irrigation
TECHNICAL ALARM
Relays
06:13
Wednesday 01 March 2017
1

Technical alarms

FLOOD alarm
GAS alarm
GAS alarm 2
06:13
Wednesday 01 March 2017
2
A
Technical alarms
"GAS OH6I alarm"
Ok
Home Back
Home Back
Technical alarms
When there is a technical alarm, a pop-up is displayed giving information about the type of
alarm detected . The flashing red icon on all of the screens A, indicates that the alarm is still
in progress . Tap the icon to automatically open the summary screen for the sensors used for
detecting the technical alarms .
On the main screen, where the
viewed by the user is displayed B .
B
Settings
There are two types of alarms:
Technical alarm . The sensor generates an alarm signal that remains active until the
C
device the sensor is connected to is restored to the conditions prior to activation .
Reversible technical alarm . The sensor generates an alarm signal that remains active
until the sensor is restored to its original status; restoring the sensor also generates a
warning message that is shown in a pop-up .
D
C The flashing icon indicates that the alarm is still in progress .
D The sensor, highlighted by the paler coloured band in the list, indicates that an alarm that
has since been restored was detected .
Settings
Contents
icon is, the number of recorded technical alarms not yet