Unloading Paper From Power Stacker - HP LineJet Serie Kurzanleitung

Unloading Paper from Power Stacker

Removing All Paper from the Printer:
1.
Unload paper from the print mechanism following the
procedure on page 52.
2.
Open the cabinet rear door.
3.
Using the rear panel, press STACKER UP and wait for the
stacker to reach the top of its travel.
4.
Remove the paper from the rear of the printer.
5.
Close the cabinet rear door.
Note If the paper is not to be removed from the print mechanism, use
the following procedure.
Unloading Paper from Power Stacker
75