HP LineJet Serie Kurzanleitung Seite 45

A
Thin Paper
B Medium Paper
C Thick Paper
6.
Lower the forms thickness lever. Set it to match the paper
thickness.
The A-B-C scale corresponds approximately to 1-, 3-, and 6-
part paper thickness. Adjust until you have the desired print
quality.
Caution Do not set the forms thickness lever too tightly; excessive
friction can cause paper jams, ribbon jams with potential for
ribbon damage, smeared ink, or wavy print.
7.
Press CLEAR to clear the "LOAD PAPER" fault message from
the Liquid Crystal Display.
8.
Press FF several times to make sure the paper feeds properly
beyond the tractors and over the lower paper guide. Feed
sufficient paper to ensure the paper stacks correctly.
9.
Close the printer cover. Close the cabinet front door.
10.
Press ON LINE to place the printer in online mode and resume
printing.
Reloading Paper
45