The Power-Up Configuration - HP LineJet Serie Kurzanleitung

Chapter 1
Configuration

The Power-Up Configuration

When you power on the printer for the first time, it loads
configuration 0, the factory default configuration.
If you save a configuration, such as configuration 1, and turn the
power off and then back on, the printer will load the designated
power-up configuration, not the last saved configuration.
For your convenience, you can specify which configuration (0-8)
should be the power-up configuration.
Note In order to select a power-up configuration, it must be saved first.
Otherwise, the message "CONFIG. DOES NOT EXIST/Save
First" displays.
1.
Press ON LINE to place the printer offline. Open the printer
cover.
=
2.
Press
message "UNLOCKED" displays briefly.
>
3.
Press
<
4.
Press
parameter.
OFFLINE
CONFIG. CONTROL
>
+
simultaneously to unlock the control panel. The
ENTER SWITCH
UNLOCKED
OFFLINE
CONFIG. CONTROL
.
CONFIG. CONTROL
Load Config.
repeatedly until you reach the Power-Up Config.
CONFIG. CONTROL
Power-Up Config.
68