Cleaning; Storage When Not In Use; Troubleshooting - Silvercrest SBKL 40 A1 Bedienungs- Und Sicherheitshinweise

Function Action
Increase volume Briefly press Vol+ button
3
sound when the maximum
volume has been reached)
Reduce volume Briefly press Vol– button
5
sound when the minimum
volume has been reached)
End the current Briefly press the
call and answer
Play / Pause button
call waiting*
Switch between Press Play / Pause button
two calls (toggle)*
4
*These functions must be supported by your
mobile service provider.
– The ringer and the caller's voice are
rendered through the speakers
– Music playback is automatically paused
when a call is received.
– The microphone
10
– Music continues after the call has been
ended.

Cleaning

ATTENTION
Potential damage to the product!
Switch the product off and remove all plugs
before cleaning!
Be sure moisture does not enter the product
during cleaning to prevent damage to the
product and related repairs.
Only clean the product with a slightly damp-
ened cloth and a mild spray!

Storage when not in use

Store the product in a dry environment,
protected from dust and direct sunlight.
(one signal tone will
(one signal tone will
4
twice until it beeps
.
2
records your voice.
To prevent battery deterioration, at longer
storage the rechargeable battery has to be
charged regularly.

Troubleshooting

= Fault
= Possible cause
= Action
No functions
Battery drained.
Recharge the battery as described in
"Charging the battery".
No Bluetooth connection
Error operating the headphones.
Switch the headphones off and on again.
Communication device error.
Separate the connection to the headphones
and connect again.
Check if other devices using Bluetooth
standard 4.1 work with the communication
devices.
Bluetooth connection error.
®
Move closer to the devices connected via
Bluetooth .
®
No sound
The headphones volume is set to Minimum.
Press the Vol+ button
ume.
Error operating the communication device.
Increase the volume on the playback device.
Bluetooth connection error.
®
Move closer to the devices connected via
Bluetooth .
®
Disconnect Bluetooth
Unable to use all functions
Communication device error.
Verify your communication device supports
all functions.
to increase the vol-
3
and reconnect.
®
GB 13