Removing And Fitting The Battery; Fitting The Battery; Removing The Battery; Switching The Blower On/Off - Stihl BGA 56 Gebrauchsanleitung

English
► Push nozzle (1) into required position on blower tube (4).
► Rotate nozzle (1) until it engages.

8 Removing and Fitting the Battery

8.1

Fitting the Battery

1
2
► Insert the battery (1) in the battery compartment (2) and
press it home until you hear a click.
Arrows (3) on battery (1) are still visible and battery (1) is
held securely in battery compartment (2). There is no
electrical contact between blower and battery (1).
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages with a second click and is flush
with the blower's housing.
8.2

Removing the Battery

► Stand the blower on a level surface.
► Hold one hand in front of the battery compartment to
ensure the battery does not fall out.
40
3
► Press the locking lever (1) with your other hand.
The battery (2) is unlocked and can be removed.

9 Switching the Blower On/Off

9.1

Switching On

► Hold the blower with one hand on the control handle -
wrap your thumb around the handle.
► Pull the trigger with your index finger and hold it there.
The blower accelerates and air flows from the nozzle.
9.2

Switching Off

► Release the trigger.
No air flows from the nozzle.
8 Removing and Fitting the Battery
1
2
0458-712-9821-C