Spot Metering Mode - Olympus D-230 Anleitung

1 Open the lens barrier.
The camera turns on in the Record mode.
2 Press the
The monitor shows the Camera menu.
3 Select [CAMERA] using the
4 Select [FOCUS] using the
5 Select [
En
The fixed focus setting is now completed.
Press the
6 Take a picture.
The fixed focus is canceled after 1 picture is taken and the Focus mode returns
Note
to AUTO (default setting).

SPOT METERING MODE

Your subject may appear dark when it is against a bright background. In this
case, change the metering setting to SPOT. The camera calculates the
exposure using only the lighting information at the center of the viewfinder
without it being affected by the background light.
Metering settings
Note
ESP (
SPOT (
1 Open the lens barrier.
The camera turns on in the Record mode.
2 Press the
The monitor shows the Camera menu.
3 Select [CAMERA] using the
4 Select [
5 Select [
button.
The spot metering setting is now completed.
Press the
6 Position the AF target mark over the subject in the viewfinder, and take
a picture.
Note The metering mode returns to ESP (default setting) when the clear settings value
is [RESET] and the lens barrier is closed. See "Clear settings" (
18
En
button.
] using the /
button again to exit the menu.
): The light in the center of the viewfinder and in the surrounding
area are measured separately to obtain the optimum exposure.
(No mark is displayed on the LCD monitor)
): Only the light in the center of the viewfinder is measured to obtain
the correct exposure for the subject.
button.
] using the /
SPOT] using the
button again to exit the menu.
/ buttons and press the
/ buttons and press the
buttons and press the
/ buttons and press the
buttons and press the
/ buttons and press the
button.
button.
button.
button.
button.
p.27).