Herunterladen Inhalt Inhalt Diese Seite drucken

Sequence Mode; Fixed Focus - Olympus D-230 Anleitung

Digitalkamera
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 66
• The self-timer is canceled automatically after the picture is taken.
Note
• To cancel the self-timer after the shutter button has been pressed, press the
button.

SEQUENCE MODE

The Sequence mode allows you to take a rapid succession of still images
by pressing and holding the shutter button (up to 8 images at approx. 1.2
frames per second). You can choose the best image from a series of
sequential shots. When you have found your best shot, you can also erase
the rest of the images. See "Erasing an image" (
1
Open the lens barrier
The camera turns on in the Record mode.
2
Press the
button.
The monitor shows the Camera menu.
3
Select [CAMERA] using the
4
Select [DRIVE] using the
5
Select [
SEQUENCE] using the
button.
The sequence mode setting is now completed.
Press the
button again to exit the menu.
6
Take pictures. (Press the shutter button and keep it pressed. Recording
will stop when the shutter button is released.)
• The sequence mode is canceled when the clear settings value is [RESET] and
Note
the lens barrier is closed. See "Clear settings" (
• The flash can not be used in this mode.
• To prevent camera shake, the maximum shutter speed is limited to 1/30
second. As a result, dark subjects may appear darker than in other shooting
modes.
• After sequence shooting, a longer time than usual may be required to save
images to the SmartMedia card.
• The maximum number of images that can be shot in succession varies,
depending on the image quality and the number of recordable images on the
SmartMedia card, etc.
Do not open the card cover or remove the AC adapter, batteries or SmartMedia
card while the orange lamp on the right of the viewfinder is blinking. Doing so
Caution
could destroy image data stored on the card.

FIXED FOCUS

This function is useful for shooting distant scenes that are difficult to bring
into focus, such as taking pictures of large fire work displays.
To achieve more effective image at night, set the flash to the Night Scene
mode in addition. See "Flash" (
p. 12).
/
buttons, and press the
/
buttons, and press the
/
buttons and press the
p.27).
p.14).
En
button.
button.
17
En

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

C-2

Inhaltsverzeichnis