When Playing Back Pictures; Setting The Date And Time - Olympus D-230 Anleitung

Turning the camera off:
Close the lens barrier.
The camera turns off.

WHEN PLAYING BACK PICTURES

Turning the monitor on:
Press the
barrier closed.
En
The camera turns on in the Play mode
and the monitor turns on.
Turning the monitor off:
Press the
The camera and the monitor turns off.
When the camera is powered by batteries, it turns off automatically when no
Note
operation has been performed for 1 minute. You need to turn the camera on
again.

SETTING THE DATE AND TIME

1 Press the
The monitor turns on.
2 Press the
The monitor shows the Play menu.
3 Select [SETUP] using the
4 Select [
5 Select the date format "Y-M-D (Year-Month-Day)", "M-D-Y (Month-Day-
Year)" or "D-M-Y (Day-Month-Year)" using the
press the
The monitor shows date setting screen.
6 Set the first figure using the
The cursor moves to the next figure.
7 Repeat until the date and time settings are set.
8 Press the
The date and time setting is completed.
9 Press the
The monitor turns off.
If the camera is left for about 1 hour with the batteries removed, the date and
time settings may be canceled and revert to the default settings. Make sure that
Caution
the date and time settings are correct before taking an important picture.
The date and time can be set both in the Record mode and the Play mode using
Note
the same procedure.
10
En
button with the lens
button.
button.
button.
/
] using the /
button.
button when the clock shows 00 seconds.
button.
buttons and press the
buttons and press the
/
/ buttons and press the
button.
button.
buttons, and
button.