Displaying Image Information; Monitor Brightness - Olympus D-230 Anleitung

DISPLAYING IMAGE INFORMATION

This function enables you to display or not to display the image information
on the monitor while the image is played back. If you select [ON], the
information is displayed for 3 seconds. For details of the information
displayed, see "Monitor indications" (
1 Close the lens barrier and press the
The camera turns on in the Play mode.
En
2 Press the
The monitor shows the Play menu.
3 Select [PLAY] using the
4 Select [INFO] using the
5 Select [ON] using the
The image information is displayed on the image.
Press the
• The image information display setting returns to [OFF] (default setting) when
Note
the clear settings value is [RESET] and the camera is turned off. See "Clear
settings" (
• Only
image information display setting is set to [ON] or [OFF].

MONITOR BRIGHTNESS

If the monitor is hard to see, you can adjust it to suit the surrounding
brightness.
1 Close the lens barrier and press the
The camera turns on in the Play mode.
2 Press the
The monitor shows the Play menu.
3 Select [SETUP] using the
4 Select [
5 Adjust the brightness of the monitor using the
press the
[+] makes the monitor brighter and [–] makes it darker.
6 Press the
The monitor brightness setting is now complete.
Press the
The monitor brightness setting remains when the camera is turned off.
Note
28
En
button.
/
/
/
button again to exit the menu.
p.27).
, and are displayed after 3 seconds, regardless of whether
button.
/
] using the /
button.
button.
button again to to exit the menu.
).
button.
buttons and press the
buttons and press the
buttons and press the
button.
buttons and press the
buttons and press the
/
button.
button.
button.
button.
button.
buttons and