Silvercrest SFPW 360 B1 Bedienungsanleitung Seite 51

Permanent projection
For a permanent projection, the mains adapter must
be connected (see section Connecting to a power
supply).
♦ Set the On/Off switch for permanent projection
to the "ON" position to turn on the projection.
♦ Set the On/Off switch for permanent projection
to the "OFF" position to switch off the projection.
Rotate the projection
♦ Press the ROTATION TIME/TEMP button
repeatedly to rotate the time or temperature projec-
tion in 90° increments.
Focussing the projection
♦ Turn the FOCUS dial
tion arm
Switching the projection between time and
temperature
♦ Touch the
projection.
♦ While the projection is on, press
the ROTATION TIME/TEMP button
around 3 seconds. The projection switches be-
tween time and temperature.
SFPW 360 B1
to focus the projection.
button
on the rear of the projec-
to switch on the
GB │ IE
for
│
47 ■