♦
Press the – /WEEK LANG button
+/ZONE 12/24 button
♦
Press the SET button
second clock time is shown on the display.
International time display/time zone
You can use this function to show any desired time
zone on the display.
NOTICE
In countries that can receive the DCF signal but are
in a different time zone, you can set the correspond-
ing time zone.
If you are in a country where the local time is one
hour ahead of Central European Time (CET +1), you
should set the time zone to
to be controlled by the DCF signal, but the device
will display the correct local time.
Setting the time zone
♦
In basic mode, press the +/ZONE 12/24 but-
ton
for about 3 seconds. ZONE appears on the
display.
♦
Press the SET button
The display flashes
♦
Press the – /WEEK LANG button
+/ZONE 12/24 button
♦
Press the SET button
time of the time zone is shown on the display.
♦
Press the +/ZONE 12/24 button
3 seconds to switch between the time zone
(ZONE) and the local time.
SFPW 360 B1
to set the desired value.
to confirm your entry. The
0 1
. The time will continue
for about 3 seconds.
0 0
.
to set the desired value.
to confirm your entry. The
or the
or the
for about
GB │ IE
│
43
■