6
Install the Base (20) on the
wall using suitable screws (not
supplied).
Note
Use four or more screws of 8 mm diameter or equivalent
(not supplied).
Use a level to check whether the Base (20) is level.
Fit four screws to the holes of Base Adaptor with
Base (20) (2-a only).
2-a
2-b
Preparing for the installation
of the TV
Make sure to attach the Table-Top Stand
before installing the TV to the wall by referring
to the Setup Guide.
KD-85/75XH80xx,
KE-85/75XH80xx
1
Mark the installation location on
the wall.
Use masking tape, etc. (not supplied) to
mark the location of the TV near the
Base or Base Adaptor. Refer to the
following table.
Screen centre point
(mm)
Model Name
KD-85XH80xx
KE-85XH80xx
KD-75XH80xx
KE-75XH80xx
− 12 (GB) −
(1,000)
(300)
Masking tape
1,899
471
200
1,686
373
150
43
51