Kd-65Xh81Xx / 65Xh80Xx / 55Xh81Xx / 55Xh80Xx, Ke-65Xh81Xx / 65Xh80Xx / 55Xh81Xx / 55Xh80Xx - Sony SU-WL450 Installationsinformationen

6
Detach the Table-Top Stand
from the TV.
 Remove one side of the Table-Top Stand
at a time. Firmly hold the Table-Top
Stand securely with both hands while
the other people lift up the TV.
 Repeat the previous step and remove
the other side of the Table-Top Stand.
Note
 Three or more people are required to detach the
Table-Top Stand.
 Be careful not to use excessive force while detaching
the Table-Top Stand from the TV as it may cause the
TV set to fall resulting in personal injury or physical
damage to the TV.
 Take care when handling the Table-Top Stand to
prevent damage to the TV.
 Be careful when lifting the TV as the Table-Top Stand
is detached, the Table-Top Stand may topple over
and cause personal injury.
 Take care when removing the Table-Top Stand from
the TV to prevent it from falling over and damaging
the surface that the TV is sitting on.
KD-65XH81xx / 65XH80xx /
55XH81xx / 55XH80xx,
KE-65XH81xx / 65XH80xx /
55XH81xx / 55XH80xx
1
Remove the screws from the
rear of the TV.
Note
 Be sure to store the removed screws and unused
parts in a safe place, keeping them away from
children.
2
Attach the Wall-Mount
Attachment (supplied with the
TV) to the rear of the TV (to
make it parallel with the wall).
3
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
6.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
− 14 (GB) −
1.5 N·m
{15 kgf·cm}
VS