Intended Use - Miomare HG00383A Montage-Und Sicherheitshinweise

MULTI-FUNCTION
SHOWER HEAD SET
z Intended use
Suitable for use with all pressure-resistant hot water
systems such as central heating, continuous-flow
water heater, pressure boiler etc. It is not suitable
for non-pressurised water heaters such as wood-
fired or coal-fired hot-water heaters, oil-fired or
gas-fired heaters, open electrical storage heaters.
The product is intended for personal use only and
not for medical or commercial use.
z Description of parts
Shower head
1
Hand shower button
2
Hand shower
3
Threaded connection
4
Seal
5
Threaded connection
6
(for attaching to the hand shower)
Shower hose
7
Water-saving insert
8
z Technical data
Hand shower: 3-way setting
Dimensions
Shower head: HG00383A:
approx. ø 12.4 x 26.9 cm (L)
HG00383B:
approx. ø 11.5 x 26.7 cm (L)
HG00383C:
approx. ø 12.3 x 25.2 cm (L)
HG00383D:
approx. ø 12.3 x 25.2 cm (L)
Shower hose: approx. ø 1.4 cm x 175 cm (L)
Thread: 21 mm (G½'') standard
connection
Safety instructions
KEEP ALL THE SAFETY ADVICE AND
INSTRUCTIONS IN A SAFE PLACE FOR FUTURE
REFERENCE!
To avoid the risk of injury!
Never leave children unsupervised with the
¾
packaging materials. It is not a toy.
CAUTION! DANGER OF INJURY!
Please ensure that no parts are damaged
and that all parts are correctly assembled.
Incorrect assembly or fitting may lead to injury.
Damaged parts can adversely affect safety
and proper function.
CAUTION! RISK OF SCALDING!
Adjusting the hand shower may change the
temperature of the water coming out. Check
the water temperature before stepping into the
shower.
WARNING!
Suitable for use with all
pressure resistant hot water systems such as
central heating, continuous-flow water heater,
pressure boiler, etc. Not suitable for use with
non-pressurised water heaters such as boilers,
nonpressurised reservoirs, etc. In case of doubt,
consult a professional plumber or technical
consultant.
Make sure that the product is only installed by
¾
capable persons.
Please check the product regularly for leakage.
¾
Note: For fittings with 26.4 mm (G¾")
connections use an adapter with a 26.4 mm
(G¾") internal thread and a 21 mm (G½'')
external thread. This adapter can be obtained
from any good builder's or plumber's merchant.
z Cleaning and care
Clean the product with a soft, damp cloth and
¾
use a mild cleaning agent if necessary.
Use an ordinary lime scale cleaner to remove
¾
lime scale deposits from the product. Observe
the instructions for use of your cleaner.
z Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
GB/IE 5