Side Parts - B+B Pyro Start Plus Bedienungsanleitung

PYRO START PLUS / SL
4.2.3 Fitting the legrests
• Hold the upper part of the legrest that it points outwards. Activate
the handle and now push the legrest with the guide profile into the
hole in the frame (see fig. 9).
• The legrest is now simply folded forward which locks it
automatically into place.
9
4.2.4 Removing the legrests
To transport your wheelchair as compact as possible, you can remove
legrests completely along with the foot plates (see fig. 10).
10
• Pull the handle in order to open the locking mechanism.
• Swing the legrest 90° outwards and pull it upwards (see fig. 10).
4.2.5 Swinging the legrests away
To make it as easy as possible to get into and out of your B+B folding
wheelchair, if necessary you can simply swing the legrests away either
outwards or inwards, without having to remove them (see fig. 10).
• Pull the handle. This opens the locking mechanism.
• Now you can swing the legrest away, outwards or inwards.
• If necessary, fold the foot plates upwards first.
15
| Lightweight wheelchair
Check the legrests are firmly attached before setting
off!
Lightweight wheelchair |
To return to the original position, simply swing the legrest forwards
until it locks into place.
When standing up from the wheelchair, you shall never stand on the
foot plates under any circumstances!
4.2.6 Adjusting the legrest length
The standard adjustment which can be made to the legrest length is a
total of 80 mm in 5 x 20 mm steps. To do so, remove the socket head
screw (4 mm Allen screw) and adjust the legrest as required (see fig.
11).

4.3. Side parts

In order to be able to get in / out more easily, both side parts and
the arm rests can be swung backwards. Activate the locking lever
using light finger pressure (see fig. 12) and swing the side part away
backwards at the same time.
Do not use the side parts to lift up the
wheelchair!
To lock the side part, fold it forwards and allow it to click into place
with light pressure on the armrest (see fig. 13).
When swinging the side parts, ensure that no articles
of clothing or other items can get jammed. Check the
side parts are firmly attached before starting to use
the wheelchair.
Bischoff & Bischoff GmbH | 12.02.2020
PYRO START PLUS / SL
11
12
13
16