Ethernet/Ip Technical Specifications; Disposal - Grundfos CIM 500 Installations- Und Bedienungsanleitung

7.4 EtherNet/IP technical specifications

Minimum requested packet interval
I/O data
Number of IO connections
Number of encapsulation sessions
Number of explicit messaging connections
User-specific objects
Maximum number of connections
Standard objects
DHCP
Functional scope
Watchdog
Certificate

8. Disposal

This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
See also end-of-life information at
www.grundfos.com/product-recycling.
18
15 ms
505 bytes output
509 bytes input
Maximum 255 bytes I/O data per assembly.
10
Default; configurable depending on available socket
resources.
10
Default; configurable depending on available socket
resources.
2 explicit messaging connections per encapsulation
session
20 explicit messaging connections in total, configurable.
Object 100. Depending on connected product.
• Grundfos pump
• Grundfos booster
• Grundfos dosing.
2 explicit messaging connections x 10 encapsulation
sessions
Additional 10 I/O connections
Total: 30 connections.
• Identity object (class 0x01)
• Message Router object (class 0x02)
• Assembly object (class 0x04). Assembly: up to 32
• Connection Manager object (class 0x06)
• Device Level Ring (DLR) object (0x47)
• Quality of Service (QoS) object (0x48)
• TCP/IP Interface object (0xF5)
• Ethernet Link object (0xF6)
Supported
• Adapter
• Support of 2 Ethernet Link objects for implementing
ring and daisy chain topologies
• Device Level Ring (DLR) protocol
(announce-based ring node)
• Quality of Service (QoS)
• IPv4 Address Conflict Detection (ACD)
Communication watchdog with fixed 5 seconds
time-out. It can be enabled via the CIM 500 web page.
Plugfest December 2018, Conformance July 2019.