G-U SECUREconnect 100 Montage- Und Bedienungsanleitung Seite 42

SECUREconnect 100
5.4.4 Connecting a 230V AC voltage supply
SECUREconnect 100 is suited for operation with 230V AC voltage.
The mains cable is plugged in at the bottom side of SECUREconnect 100R and must be
fixed by all means with the attached cable tie to prevent it from coming loose.
Attention
With metal and PVC doors, it is necessary to drill a cable inlet with a
minimum diametre of 20 mm.
The borehole must be fitted with the enclosed rubber grommet to protect the lead.
All edges touched by the mains cable must be unsharp and free of burrs.
If SECUREconnect 100 is connected to 230V AC, a 24V AC 0.2 A voltage for external devices
will be available at terminals V42 and G42.
42
SECUREconnect 100R
for
Ø20
Ø20 bore