G-U SECUREconnect 100 Montage- Und Bedienungsanleitung Seite 39

Power and Data Transmission Unit
5.3.2 Connection terminals for electrical locks
The terminals GS, VS, and 90 are provided for the connection of mechatronic locks from
G.U-BKS (for particular connection diagrams see appendix).
5.3.3 Connection terminals for LED
Terminals 56 and GS are provided for the connection of an LED signallingunlocked status.
This is useful, e.g., for illuminated door knobs or push bars. The power output is short circuit
protected and limited to 20 mA which allows the LED to be connected without pre-resistor.
Approx. 3 s after door release, the power output is switched on for the duration of release,
however, not longer than 15 s regardless of whether in short-time OPEN or permanent OPEN
mode.
The switch-on time cannot be changed.
5.3.4 Options 1-3
Terminals 94, 95, and 96 are reserved for optional applications.
SECUREconnect 100F
Terminals 94-96
39