HIKOKI CR 13VEY Bedienungsanleitung Seite 4

English
○ Delay the feed speed when cutting the material into
small circular arcs. An unreasonably fast feed may break
the blade.
Plunge cutting (Fig. 12 and 13)
○ Avoid plunge cutting for metallic materials. This can
easily damage the blade.
○ Never pull the switch trigger while the tip of the saw
blade tip is pressed against the material. If you do so, the
blade can easily be damaged when it collides with the
material.
○ Make absolutely sure that you cut slowly while holding
the body fi rmly. If you apply any unreasonable force to
the saw blade during the cutting operation, the blade can
easily be damaged.
14. The motor can be locked sometimes, depending
on the combination of the material to be cut and the
blade. Whenever the motor gets locked, switch it off
immediately.
15. Never touch moving parts.
Never place your hands, fi ngers or other body parts near
the tool's moving parts.
16. Never operate without all guards in place.
Never operate this tool without all guards or safety
features in place and in proper working order. If
maintenance or servicing requires the removal of a
guard or safety feature, be sure to replace the guard or
safety feature before resuming operation of the tool.
17. NEVER leave tool running unattended. Turn power off .
Don't leave tool until it comes to a complete stop.
18. The power tool is equipped with a temperature
protection circuit to protect the motor. Continuous work
may cause the temperature of the unit to rise, activating
the temperature protection circuit and automatically
stopping operation. If this happens, allow the power tool
to cool before resuming use.
19. Do not give a strong shock to the switch panel or break it.
It may lead to a trouble.
NAMES OF PARTS (Fig. 1 – Fig. 13)
Blade holder
1
Blade
2
Base
3
Base lever
4
Change lever
5
Handle
6
Switch trigger
7
Switch stopper
8
Motor
9
Front cover
0
Housing
!
Name plate
@
Hook
#
Switch palel
$
Mode selector switch
%
Blade hole
^
Lever
&
Slit of plunger
*
Another blade
(
Stroke
)
Machine oil
q
Air gun
w
SYMBOLS
WARNING
The following show symbols used for the machine. Be
sure that you understand their meaning before use.
CR13VEY: Reciprocating Saw
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/
EU on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Switching ON
Switching OFF
Lock
Switch locks to the "ON" position.
Mode selector switch
Mode indicator lamp
Minimum speed mode
Minm
Low speed mode
Lm
Middle speed mode
Mm
High speed mode
Hm
Max. speed mode
Maxm
Straight mode
Orbital mode
Straight cutting
4