Introductory Information; General Information / Safety - HITZE ALBERO Serie Bedienungs- Und Montageanweisung

EN

1. INTRODUCTORY INFORMATION

Dear Customer, thank you for buying Hitze product!
Natural heating – these words perfectly reflect the philosophy of HITZE brand. In line
with this philosophy, we produce fireplaces and stoves fired with wood or wood pellets,
i.e. the raw materials which are the least harmful for the environment. Using a state-of-
the-art technology, we have created innovative solutions offering modern designs and
high heating efficiency.
Our products have been designed to provide you with trouble-free operation and cosy
warmth!
Before installing and connecting the fireplace insert, it is absolutely essential
to become familiar with the Operation and Installation Manual and check if all
components are included.
NOTE:
This device must not be used by children.
Never leave your children or animals unattended when the fire is burning or when
the fireplace is still hot.
Use protective gloves to open the door of the insert after and during its use.
Danger of burns (the glass and parts of the fireplace installation can be very
hot).
In order to improve the product, the Manufacturer reserves the right to make changes
in drawings, photographs and descriptions or to modify the parameters of equipment
without notice at any time. The Operation and Installation Manual may not be copied as
a whole or in part without prior consent of the Manufacturer. Please make sure that the
Operation and Installation Manual is stored out of reach of children.If the Operation and
Installation Manual is destroyed, lost or damaged, contact your purchase point or the
Manufacturer and provide the identification data of your device to obtain a replacement
copy.
It is required that the assembly of the insert is made by a qualified person or
company, and the technical inspection by a chimney master and a specialist in fire
protection.

1.1. GENERAL INFORMATION / SAFETY

Compliance with the Manual is essential for ensuring the correct functioning of the
fireplace and avoiding damage and accidents caused by improper use. Please observe
the following safety rules:
• before installing the insert or performing any maintenance work on it, make sure that
you have read and understood the Operation and Installation Manual;
• the fireplace insert should be installed at the most convenient location and in
conformity with the applicable construction and fire prevention laws;
• installation, maintenance and operation control activities may only be performed by
qualified specialists;
• the device may only be used in accordance with its intended purpose;
• it is absolutely necessary to provide the installation site with appropriate ventilation
and air intake sources;
• a clothes dryer may be placed at least 1.5 m away from the insert (to minimize the
risk of a fire);
• check the permissible load carrying capacity of the substructure (floor, ceiling) at the
intended location of the insert (taking into account the total weight of the insert and
its encasing);
26