Hilti TE 30 Original Bedienungsanleitung Seite 23

Trouble or fault
The drill bit cannot be re-
leased.
The drill bit makes no
progress.
8 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
In accordance with the European Directive on waste electrical and electronic equipment and its implemen-
tation in conformance with national law, electric tools or appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
▶ Disposal of electric tools or appliances together with household waste is not permissible.
9 Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
10 EC declaration of conformity
Manufacturer
Hilti Aktiengesellschaft
Feldkircherstrasse 100
9494 Schaan
Liechtenstein
We declare, on our sole responsibility, that this product complies with the directives and standards listed
below.
Designation
Type designation
Generation
Year of design
Type designation
Generation
Year of design
Type designation
Generation
Year of design
Applicable directives:
Applicable standards:
Possible cause
The chuck is not pulled back fully.
The tool has been set to reverse
rotation.
Combihammer
TE 30
01
2008
TE 30-AVR
01
2008
TE 30-C-AVR
01
2008
• 2004/108/EC (up to April 19, 2016)
• 2014/30/EU (as of April 20, 2016)
• 2006/42/EC
• 2011/65/EU
• EN 60745-1, EN 60745-2-6
• EN ISO 12100
Action to be taken
▶ Pull the chuck back as far
as it will go and remove the
accessory tool.
▶ Set the tool to forward rotation.
17