Troubleshooting - EINHELL i-P22 Originalbetriebsanleitung

Anleitung_FH_800_SPK7__ 13.03.13 14:56 Seite 13

11. Troubleshooting

If the equipment is operated properly you should experience no problems with malfunctions or faults. In the
event of any malfunctions or faults, please check the following before you contact your customer services.
Fault
The equipment does not heat
Possible cause
The power plug is not connected
The On/Off switch is not switched
On
The thermostat is set too low
The overheating guard has
triggered
GB
Remedy
Connect the power plug
Switch on the On/Off switch
Increase the temperature
See section 7.3
13