Philips AVENT SCF397 Bedienungsanleitung Seite 10

English
10
The following parts do not come into contact with the breast and breast milk; clean them as described
below:
Step 1: Disassembling
Make sure that you remove the white valve from the breast pump.
Step 2: Cleaning
The parts that come in contact with milk can be cleaned manually or in the dishwasher.
Warning: Do not use antibacterial or abrasive cleaning agents to clean the breast
pump parts as this may cause damage.
Caution: Never put the motor unit or the adapter in water or in a dishwasher, as this
causes permanent damage to these parts.
Caution: Be careful when you remove and clean the white valve. If it gets damaged,
your breast pump does not function properly. To remove the white valve, gently pull at
the ribbed tab on the side of the valve. To clean the white valve, rub it gently between
your fingers in warm water with some dishwashing liquid. Do not insert objects into the
white valve, as this may cause damage.
When
Clean when needed.
How
Wipe with a clean, damp cloth with
water and mild detergent.