Installing The Unit (In-Dash Mounting) - Kenwood KMM-106 Bedienungsanleitung

Installation/Connection

Installing the unit (in-dash mounting)

Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
14
ENGLISH
Do the required wiring.
(Page 15)
Dashboard of your car
Bend the appropriate tabs to hold the
sleeve firmly in place.
Removing the unit
1
Detach the faceplate.
2
Remove the trim plate.
3
Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.