Hot Surface; Introduction; Warnings And Symbols Used; Intended Use - Silvercrest SHLF 2000 D1 Bedienungs- Und Sicherheitshinweise

The following warnings are used in this user manual and on the packaging:
DANGER! This symbol in combination
with the signal word "Danger" marks a
high-risk hazard that if not prevented could
result in death or serious injury.
WARNING! This symbol in combination
with the signal word "Warning" marks a
medium-risk hazard that if not prevented
could result in death or serious injury.
CAUTION! This symbol in combination
with the signal word "Caution" marks a
low-risk hazard that if not prevented could
result in minor or moderate injury.
CAUTION.

Hot surface!

FAN HEATER
˜ Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the product as
described and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.
6 GB/CY

Warnings and symbols used

Voltage (alternating current)
Hertz (supply frequency)
Watt
Danger – risk of electric shock!
NOTE: This symbol in combination
with "Note" provides additional useful
information.
Symbol for a Protection Class II product.
WARNING! Do not cover the product to
prevent it from overheating.
The frost protection function prevents the
room temperature from dropping below
freezing.
˜ Intended use
The product can be used for short-term heating of
rooms. It can also be used as a fan with the heating
function turned off.
The product is designed for household use; it is not
suitable for commercial use.
The manufacturer accepts no liability for damages
caused by improper use.