La Cimbali S20 Kurzanleitung Seite 63

Maintenance to be performed every 7 days
CLEANING THE SOLUBLES CIRCUIT (WHERE PRESENT)
CLEANING THE MIXER
1
Access the solubles mixer by
opening the lock (12)
5
Separate the powder funnel.
8
CLEANING SOLUBLES HOPPER (where present)
Remove any soluble powder remaining in the hopper. Wash with a damp
cloth and the products and methods normally used for articles in contact
with food; rinse thoroughly and dry, removing any organic residue.
Before replacing the hopper on the machine, make sure that wet or moist
parts are completely dry.
2
12
Open the control panel.
6
Remove the powder deposit
drawer.
3
Push the closing device.
7
9
At the end of cleaning, replace all parts previously removed.
25 EN
4
Hold the closing device and lift
the hopper.
• Place ½ litre of cold water in the container
and add a dose of liquid detergent (see
product instructions).
• Wash the individual parts, removing any
organic residue with a sponge.
• Soak all the mixer parts in the solution
(water + detergent) for at least 15 minutes.
• Remove all parts from the solution and
rinse.