La Cimbali S20 Kurzanleitung Seite 57

14. Beverage dispensing - Hot water
1
Place the appropriate container under the hot water dispenser (3). If
necessary, adjust the height of the dispensing nozzle by pulling towards
the basin (11).
3
The programmed dose of hot water will be dispensed from the nozzle
(3); it will stop automatically.
Note: dispensing can be interrupted by pressing the
Pressing the key does not change the programmed parameters.
3
11
key.
2
Press a hot water dispensing icon
NOTE
The hot water icons can be personalised with a label for
easier identification.
E.g.:
For activation methods, refer to the CUSTOMER PROGRAMMING/
CUSTOMISATION/WATER/STEAM SETTINGS" section.
NOTE: the customisation
seen if the "Customer Programming" item is enabled in the machine
configuration menu, which can only be accessed by the installer technician.
19 EN
.
and programming menus can only be