Operating The Hedge Trimmer; Holding And Controlling The Hedge Trimmer; Adjusting Angle Of Cutter Bar - Stihl HLA 56 Gebrauchsanleitung

English

11 Operating the Hedge Trimmer

11.1 Holding and Controlling the Hedge Trimmer

The hedge trimmer can be held and controlled in two ways
to suit the cutting job.
Loop Handle
► Hold the hedge trimmer firmly with one hand on the control
handle - wrap your thumb around the handle.
► Hold the trimmer with the other hand on the loop handle -
wrap your thumb around the loop handle.
Handle Hose
► Hold the hedge trimmer firmly with one hand on the control
handle - wrap your thumb around the handle.
44
► Hold the hedge trimmer firmly with your other hand on the
handle hose - wrap your thumb around the handle hose.

11.2 Adjusting Angle of Cutter Bar

The angle of the cutter bar can be adjusted to 2 different
positions upwards and 4 different positions downwards to
suit the application and the height and reach of the user.
► Switch off the hedge trimmer and remove the battery.
1
2
90°
► Hold the swivel handle (2) firmly.
► Depress the lock button (1) at both sides and hold it there.
► Move the cutter bar to the required angle.
► Release the lock button (1) at both sides.
► Move the swivel handle (2) up and down until the cutter
bar engages.
That completes the adjustment.
11 Operating the Hedge Trimmer
45°
0458-816-9821-B