Concept VS5100 Bedienungsanleitung Seite 36

EN
OPERATION GUIDELINES
REMOTE CONTROL (Fig. 4)
Description of buttons
1. ON/OFF button
Use the ON button to turn on the appliance. The fan will start in a breeze mode.
To switch off the appliance, press the OFF button.
2. SPEED SETTING BUTTON
Once the fan has started, press this button repeatedly and the fan will switch the
circulation mode in the order of 1-2-3.
3. MODE BUTTON
Press this button to select the desired mode. When pressing the button repeatedly or pressing for some time the
mode will change in the following order: normal, natural, sleep. The light indicator indicated the status of the mode.
4. ROTATION BUTTON
Once the fan starts, press this button to set the rotation mode. The indicators on the display may indicate the fan
rotation mode.
5. TIMER BUTTON:
Press the timer button repeatedly to set the fan operating time. You can increase the operating time in one hour
interval from 1 to 7 hours.
Batteries (not supplied)
1. Remove the battery cover.
2. Install batteries as shown in Fig. 5.
3. Close the battery cover.
Note: Use AAA manganese or alkaline batteries. Do not use rechargeable batteries.
Warning:
Do not dispose of batteries in fire. Batteries may explode or leak.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
36
Fig. 4
Remote control
Fig. 5
Battery
Battery
cover
VS5100/VS5110