Connecting To A Network (Pc/Nas/Internet Connection); Turning On This Unit - Yamaha CD-N500 Bedienungsanleitung

CONNECTIONS

Connecting to a network (PC/NAS/Internet connection)

You can play back music files stored on your PC or NAS, audio contents on the Internet, by connecting this unit to a
network.
Connect with a commercially available STP (shielded twisted pair) network cable (CAT-5 or higher, straight-through
cable).
ANALOG OUT DIGITAL OUT
R L COAXIAL
This unit (CD-N500)
PC
NAS
Notes
• All devices other than this unit are sold separately.
• You need to configure your PC or NAS after connecting. For details on settings, see "SETUP OF YOUR PC/NAS/MOBILE
DEVICES" (☞ P.11).
• Wired connections are recommended for each device to sustain high sound quality.

Turning on this unit

When you have established all cable connections, turn on this unit and other system components.
Press the power switch to turn this unit on.
y
• With the power switch on, you can switch this unit to on or standby mode by pressing the power button on the remote control (☞ P.6).
• For details on standby mode, see "Front panel" (☞ P.5).
10
En
OPTICAL
SOURCE PURE DIRECT
5V 2.1A
NETWORK
Network cable
LAN
Broadband router
WAN
AC IN
Modem
Internet
SELECT
PUSH ENTER
RETURN