Silvercrest 285220 Bedienungs- Und Sicherheitshinweise Seite 10

to lock into place to set the desired switching
time. Every switching pin corresponds to a
switching time of approx. 15 minutes.
Device for private use, set times may be off-
set. Not suitable for applications requiring
precise and accurate switching.
In figure B the grey pins mark a switching
time of 8:30 pm to 10:30 pm. A load is
switched on during the time from 8:30 pm
to 10:30 pm.
Setting the switching time
Push down the respective number of
switching pins
Disabling switching time
Push the switching pins
.
4
4
up again.
GB 11