Installation And Connection; Scope Of Delivery; Installing And Connecting The Appliance - Gaggenau RF 200 Gebrauchsanleitung

en Installation and connection
Open the appliance door only
¡
briefly.
Transport purchased food in a
¡
cool bag and place in the appli-
ance quickly.
Allow warm food and drinks to
¡
cool down before placing them in
the appliance.
Thaw frozen food in the refriger-
¡
ator compartment to utilise the low
temperature of the food.
The air in the appliance does not
warm up so intensely.
The appliance must cool less fre-
quently.
Always leave some space
¡
between the food and to the back
panel.
Pack the food airtight.
¡
The air can circulate and the air
humidity remains constant.
Defrost the freezer compartment
¡
regularly.
A frost-free freezer compartment is
power-saving and cools the frozen
food optimally.
Only open the freezer compart-
¡
ment door briefly and then care-
fully close it.
A closed freezer compartment
door protects the freezer compart-
ment against severe icing.
1
Depending on the appliance specifications
2
Not in all countries
34

Installation and connection

Installation and connec-
tion
You can find out where and how best
to install your appliance here. You
will also learn how to connect your
appliance to the power supply.

Scope of delivery

After unpacking all parts, check for
any transport damage and check the
completeness of the delivery.
If you have any complaints, contact
your dealer or our after-sales service
→ Page 45.
The delivery consists of the following:
Built-under appliance
¡
Equipment and accessories
¡
Installation material
¡
Installation instructions
¡
Operating instructions
¡
Customer service booklet
¡
Warranty enclosure
¡
Energy label
¡
Product data sheet
¡
Information on the energy con-
¡
sumption and noises
Installing and connecting the
appliance
Requirement: The scope of delivery
of the appliance is checked.
→ Page 34
Observe the criteria for the appli-
1.
ance's installation location.
→ Page 35
Install the appliance in accordance
2.
with the enclosed installation in-
structions.
Prepare the appliance for first use.
3.
→ Page 35
1
2