Connect Your Pet Door To Your Hub - Sure Petcare Microchip Pet Door Connect Bedienungsanleitung

Connect your Pet Door to your Hub

In order to complete the setup of your Microchip Pet Door Connect system you will need to
connect your Pet Door and Hub. This is so that your Pet Door can communicate with your Hub
and be controlled remotely using the app.
For this process you will need to be on the 'add a product' section of the app or Sure
Petcare online and your Pet Door will need to be in its intended location (either placed
or fitted). You will also need a pen or pencil handy.
1
Open the app or go online, and
select 'Add a product'. This will
put your Hub into connecting
mode and its ears will start to
flash green.
Once your Hub and Pet Door are connected you can control your Pet Door's features remotely on
the app or Sure Petcare online. Give your Pet Door a name e.g. its location - "Back Door", and feel
free to purchase and add more Sure Petcare connected products to your network.
Pet Profiles
Now that your Pet Door and Hub are connected, any data stored in
your Pet Door can be uploaded directly to your app. This includes
any pet ID numbers you have programmed into the Door. Once the
app detects these ID numbers you'll be able to create profiles for
your pets.
Select your pet's ID number to create their profile, then add their name etc.
and upload a profile picture, or even take a new photo directly through the
app. You are able to create profiles for multiple pets, all you need is for their
microchip to be programmed into the Pet Door and you're ready to go.
2
When prompted to do so on the
app or online, press the settings
button on your Pet Door once. The
green light will illuminate to show
it's in connecting mode.
3
Once your Hub and Pet Door are
connected, this symbol
will appear on the Pet Door's
screen and your Hub's ears will
return to solid green.
EN
.
14