Installing Your Pet Door In A Wooden - Sure Petcare SUR101 Schnellstartanleitung

Installing your pet door in a wooden

or plastic door
Tools and supplies required
Ruler
Spirit level
Blu Tack
Step-by-step guide
Before you begin, make sure you have programmed in all of your pets.
X
X
When using power tools, please follow all safety instructions provided
with the product.
Sharp pencil
Electric jigsaw
Protective eye-wear
To be sure your pet has unhindered access through the
pet door, measure the height of their tummy from the floor.
This measurement is the distance from the floor to the
bottom edge of the hole you need to cut. Mark this height
on your door where you want to position your pet door.
Attach a ball of Blu Tack (or similar adhesive putty) to each
rear corner of the external frame so that you can attach it
to the door and use it as a template.
Stick the frame to the door aligning the bottom edge of
the hole with the mark you previously made. Use a spirit
level to ensure the product is straight, then run a sharp
pencil around the inside edge of the frame.
Now that you have a clear outline drawn on the door, it's
time to prepare for cutting. We strongly advise that you
drill pilot holes in the corners of the outline to make it
easier to cut the hole with a jigsaw. Make sure these holes
are touching the line and that they are big enough for the
blade of the jigsaw to fit through.
Electric drill with a selection of drill bits
Cross head screwdriver
The screws and screw caps provided
EN
9