Curfew Mode; Tips And Tricks - Sure Petcare Microchip Pet Door Connect Bedienungsanleitung

Curfew mode

Curfew mode allows you to set a lock and unlock time for your Microchip Pet
Door Connect, giving your pet access to the outside for a set period of the day
(for example, unlocking in the morning and locking at night).
Once you've set a curfew time, your Pet Door will lock and unlock at these times
everyday until you change or disable it.
Please be aware that at the lock time the Pet Door will be set to the 'Keep inside' locking
mode, so your pet will still be able to enter the house, but won't be able to leave.
The easiest way to set your curfew times is by using the app or Sure Petcare online, however
in order to physically set your curfew times on the Pet Door, please follow the steps below:
1
2
3
4
5

Tips and tricks

If you're struggling to get the clock to stop at your desired time when physically pressing
the button, here is a tip which might help:
When you are getting near to your desired time, don't press and hold the button, press it
repeatedly so that the time moves at slower increments, making you less likely to miss it.
Or, you can use the app or Sure Petcare online to easily set your curfew times remotely.
Set the current time: In order to use the curfew mode you must first
set the current time. To do this, press and hold the Current time button
for around three seconds and the time on the LCD screen will flash.
To change the time, press the
it for longer increments (see tips and tricks at the bottom of the
page). Once you have reached the correct time, release the button and
the time will be saved and the screen will stop flashing.
Set the lock time: Repeat the process in steps 1 and 2, but this time
pressing the Lock time button to set your desired locking time.
Set the unlock time: Repeat the same procedure again but using the
Unlock time button.
Activate curfew mode: To activate the curfew mode, press the locking
mode button until you have selected locking mode 5 (the time should
be displayed on the screen). To deactivate the curfew mode, press the
lock mode button again and select your desired locking mode.
button repeatedly, or press and hold
EN
29