Other Main Functions; Selecting The Level Display-Level; Canceling Advanced Scm-Scm Link - JVC KD-S641 Bedienungsanleitung

Selecting the level display
—LEVEL
You can select the level display according to your
preference.
When shipped from the factory, "VOL 2" is
selected.
• VOL 1: Shows the volume level indicator.
• VOL 2: Alternates "VOL 1" setting and
illumination display.
• OFF: Erases the volume level indicator.
1
Press and hold SEL (select) for more
than 2 seconds.
"CLOCK H," "CLOCK M," "SCM LINK," or
"LEVEL" appears on the display.
SEL
2
Select "LEVEL" if not shown on the
display.
CLOCK H
LEVEL
3
Select the desired mode—"VOL 1,"
"VOL 2," or "OFF."
VOL 1
4
Finish the setting.
SEL

OTHER MAIN FUNCTIONS

CLOCK M
SCM LINK
VOL 2
OFF
Canceling Advanced SCM
—SCM LINK
You can cancel the Advanced SCM (Sound
Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source
so that you can change the sound modes simply
by changing the sources.
• LINK ON: Advanced SCM (different sound
modes for different sources.)
• LINK OFF: Conventional SCM (one sound
mode for all sources.)
1
Press and hold SEL (select) for more
than 2 seconds.
"CLOCK H," "CLOCK M," "SCM LINK," or
"LEVEL" appears on the display.
SEL
2
Select "SCM LINK" if not shown on
the display.
CLOCK H
LEVEL
3
Select "LINK OFF."
4
Finish the setting.
SEL
To activate Advanced SCM (Sound Control
Memory), repeat the same procedure and press
+ to select "LINK ON" in step 3 .
CLOCK M
SCM LINK
17