Other Main Functions; Setting The Clock; Changing The General Settings (Psm); Basic Procedure - JVC kd-sh99r Bedienungsanleitung

OTHER MAIN FUNCTIONS

Setting the clock

1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 31.)
2
Set the hour.
1 Select "CLOCK HOUR" if not shown on
the display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK MIN."
2 Adjust the minute.
1
4
Select the clock system.
1 Select "24H/12H."
2 Select either "12HOUR" or "24HOUR."
1
5
Press SEL (select) to finish the setting.
To check the current clock time while the unit
is turned off, press D (display).
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
30
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode)
control.

Basic Procedure

1
2
2
2
3
4
2
5
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 31.)
Select a PSM item you want to adjust.
(See page 31.)
Adjust the PSM item selected.
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
Press SEL (select) to finish the setting.