Changing The Lighting - Privileg SY-103A6G-P1-C81-L22-600 Gebrauchsanleitung

Page GB-20
(16)
5. Place the new charcoal filters to the right
and left of the motor and tighten them in
an anti-clockwise direction. Allow the lock
to click into place.
(15)
6. Place the grease filter (15) with the pins
into the openings.
7. Push the lock (14) up; snap the grease
filter (15) in and release the lock.
196374_GB_20180516.indd GB-20 196374_GB_20180516.indd GB-20
Care and maintenance
(17)
(16)
(14) (13)
8. Close the cover (13) again and allow it to
click into place.
9. Switch the power back on.
10. Dispose of the used charcoal filters with
household waste.

Changing the lighting

WARNING
Risk of injury!
If one of the LEDs ceases to work, it
■
must be changed by an authorised
service technician.
Note for the service technician: This
exhaust hood requires LEDs with
the ILCOS D-Code DBS-2/65-H 220-
240 V~, 2 W.
17.05.2018 14:13:14 17.05.2018 14:13:14