Operation
Before getting started
• Read chapter "Safety" on page EN-4 and
all the safety notices.
• Install the exhaust hood as described in
chapter (see "Assembly" on page EN-12).
(16)
(17)
(18)
Switch the device on
As soon as the appliance is supplied with
power, it works in standby mode.
• To switch on the device, touch the sensor
(20).
The sensor
(20) lights up. The sensor
(16) also lights up and the device works
with the slow fan speed.
Changing the fan setting
The fan has three settings:
medium and
• In order to change the fan setting during
(19)
(20)
Switching off the fan
To switch the appliance off, touch
• the sensor of the currently active fan set-
• the sensor
Operation
(18) fast.
operation, touch the sensor on the (other)
desired fan setting.
The respective sensor and the sensor
(20) light up. The appliance works with
the required fan setting.
ting.
or
(20).
The sensor
(20) and the sensor for the
current blower level go out. The device
switches to standby mode.
Page EN-17
(16) slow,
(17)