Sound-Controlled Mode; Preset Colors; Individual Color Mix; Dimmer Profiles - EuroLite LED PAR-64 COB Bedienungsanleitung

Sound-controlled mode

Thanks to the integrated microphone, the preset show programs can be played to the rhythm of the music
(sufficient bass beat provided). Press the button UP or DOWN so many times until the display indicates the
menu item Lost. Confirm with ENTER. Four options are indicated: Hold, Blackout, Auto and Sound. Use
the buttons UP and DOWN to navigate through the list. Select Sound. Confirm again with ENTER. Now
press the button MENU so many times until the display indicates SEns. Confirm with ENTER. Use the
buttons UP and DOWN to adjust the microphone sensitivity to the sound volume of the music (S001 = low,
S099 = high)

Preset colors

In the nAnu mode the device will constantly emit one of 9 preset colors. Press the UP or DOWN button so
many times until nAnu is indicated in the display. Confirm with the ENTER button. Use the buttons UP and
DOWN to select one of nine colors (COL1 to COL9). Confirm again with the ENTER button.

Individual color mix

In the color mode UcoL color intensity and strobe effects can be adjusted manually. The device will
constantly emit the color adjusted. Press the UP or DOWN button so many times until UcoL is indicated in
the display. Confirm with the ENTER button. Now the display indicates dInn for brightness. Use the buttons
UP and DOWN to adjust the brightness. Confirm with the ENTER button. Now the strobe effect can be
adjusted under the menu item StbE, after then the colors red, green, blue and white.

Dimmer profiles

In dInd mode you can choose from five dimming modes designed for different application purposes. Press
the button UP or DOWN so many times until the display indicates the menu item dInd. Confirm wih the
ENTER button. Use the buttons UP and DOWN to select the desired dimming mode (StdA for standard,
StgE for stage, tv for TV, ArAL for buildings or thAL for theatre). Confirm again with ENTER.

Dimmer curves

In dInC mode you can choose from four different dimming curves. Press the button UP or DOWN so many
times until the display indicates the menu item dInC. Confirm with the ENTER button. Use the buttons UP
and DOWN to select the desired dimming curve (LInn for linear, InuE for exponential, SuAr for inverse
exponential or SCur for s-curve). Confirm again with ENTER.
Linear
LINEAR: Light intensity increases linearly with DMX value.
SQUARE LAW: Light intensity increases exponentially with DMX value.
INVERSE SQUARE LAW: Light intensity increases inversely exponentially with DMX value.
S-CURVE: Light intensity increases S-shaped with DMX value.
Display deactivation
The display can be switched on or off. Press the button UP or DOWN so many times until LEd is indicated in
the display. Confirm with the ENTER button. Use the buttons UP and DOWN to select the option On or oFF.
In the setting oFF the display will always be on. In the setting On the display will be switched off 20 seconds
after pressing the last button; it will be switched on again the next time a button is pressed.
26/32 00125480, Version 1.1