Getting Started - Avaya 6120 Installationsanleitung - Schnelleinstieg

Getting Started

Your Avaya 6120 or 6140 WLAN Handset uses radio wave
technology to send and receive voice and data transmis-
sions. It is designed to operate much like a cell phone. How-
ever, the Handset uses the private communication system
installed in your facility and will not operate outside the area
covered by this system.
The Handset's Battery Pack must be fully charged before
its first use. Place the Handset into the Charger for a
minimum of two hours.
If you want to Then
Change the
language
Remove the
Battery Pack
Replace the
Battery Pack
4
Press the Cfg softkey to open the
Config Menu. Select Phone Settings
and then select the Language option.
Use the Nav keys to scroll to and
select the desired language. The
handset menus will now display in the
selected language. Note: There is no
language option for Italian.
Press down on the latch on the Battery
Pack at the back of the Handset and
pull the Battery Pack towards you. The
Battery Pack releases outward.
Slide the lip of the Battery Pack into
the bottom of the cavity. Push the top
of the Battery Pack until it snaps into
place. You should not have to force it
into the Handset.
English