Specifications - SSS Siedle ELM 611-01 Produktinformation

Commissioning
Bus operation
In bus operation, the key is read in
within the framework of program-
ming using the keypad integrated
in the lid of the EC 602-... or via
the Vario bus using a PC. Operation
and procedures for bus operation
are described in the programming
instructions for the EC 602-...
Stand alone operation
User keys/cards EK/EKC 601-... must
be read in at the ELM 611-... units
at which they are required to trigger
functions. This reading process is
initiated and terminated with the
master card. The master card is the
card which is read first into an
ELM 611-...
The individual user keys/cards must
be read in quickly, as an inter-
ruption of more than 15 seconds
automati-cally initiates a timeout, so
interrupting the read-in process. If
the reading process has been inter-
rupted, it can be started again at any
time with the master card.
Procedure:
Reading in the master card
After completion of installation and
switching on the system, a red LED
lights up at the front of the
ELM 611-... The ELM 611-... is ready
for the reading process. The first
user card EK/EKC 601-... read into
the ELM 611-... is automatically
defined as the master card, and can
be used to terminate the reading
process at any time or to restart a
new reading process.
The ELM 611-... is automatically
switched to the service mode. This is
signalled by a green LED. Make sure
that the master card is kept in a safe
place after completion of program-
ming.
Reading in individual user keys/
cards
The master card is used to switch the
ELM 611-... into the programming
mode (red LED lights up). By passing
them in front of the ELM 611-..., all
the remaining user keys/cards are
read into the system in sequence
and thus entitled to trigger the
switching output of the ELM 611-...
As a confirmation of each user key/
card read-in process, the green LED
flashes after around 1 second.
Termination of the read-in
process
The read-in process is terminated by
passing the master card in front of
the ELM 611-... again, or automati-
cally by a timeout function which
cuts in 15 seconds after the last user
key/card has been read in.
After completion of the read-in
process, the green LED on the front
of the ELM 611-.. lights up, so
indicating the operating status.
Cancelling individual users
It is not possible to cancel individual
users in stand-alone operation.
Reading in the master card for 15
seconds will cancel all the entered
users at the ELM 611-... To confirm
the completed cancellation pro-
cedure, the red LED flashes for 3
seconds. It is then possible to restart
the read-in process of individual user
keys/cards. The cancellation process
does not affect the master card. If
you wish to return to the default
status, i.e. you also wish to create
a new master card, the BCD rotary
switch which is located under the lid
at the back must be turned to the
„0" position and then back to the
„1" position (live).
Terminal assignment
bv, cv Power supply
Da, Db Data lines
S1, S2 Switching contacts

Specifications

Operating voltage: 12 V AC
Operating current: 120 mA
Contact type: n.o. contact 24 V, 1 A
Protection system: IP 54
Ambient temperature:
-20°C to +55°C
Dimensions (mm) W x H x D:
99 x 99 x 27
Declaration of conformity
We, S. Siedle & Söhne, hereby
declare that these devices comply
with the underlying requirements
and other relevant stipulations of
Directive 1999/5/U. The Declaration
of Conformity can be found on
www.siedle.de in the download area
or can be requested from Siedle.
The unit can be operated in the fol-
lowing countries:
AT, BE, CH, DE, DK, ES, FI, FR, GB,
GR, IT, IS, NL, NO, PT, SE.
7