Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Installation
Application
Central intercom station ZS 932-3S
for 3 elevators or for 3 entryway
speakers without door release
buttons.
Central intercom station
ZS 932-0S for wall mounting as:
a) Simple call station in the elevator
engine room.
b) Central intercom station in con-
junction with the central intercom
call station accessory ZZS 932-0 and
multifunction modules MFM 932-5S
for monitoring up to 20 elevators.
c) Central call station as described
under "b" but for up to 10 entryway
speakers with release buttons.
Using accessories, conversion for
table-top or control panel mounting
(see general installation instructions).
Installation
1 Open the system telephone
2 Insert the ZZS 932-0 in the
central intercom station ZS 932 and
connect.
Remove jumper 1
a) Connect pin "1" of the ZS pcb to
pin "1" of the ZZS 932-0
b) Connect pin "3" of the ZS pcb to
pin "3" of the ZZS 932-0
c) Connect pin "8" of the ZS pcb to
pin "8" of the ZZS 932-0
d) Connect pin "9" of the ZS pch to
pin "9" of the ZZS 932-0
3 Connect up as indicated in circuit
diagram AS-71...
The circuit diagrams are enclosed
with the control unit SZ 911a-...
4 Open the inscription field
5 Comparison to previous versions
6 Schematic diagram ZS 932-0S
7 Schematic diagram ZS 932-3S
Specifications
• Operating voltage 12 - 14 V DC
• Operating voltage without
ZZS 932-0 appr. 125 mA, with
ZZS 932-0 appr. 145 mA
• Pilot lamp appr. 30 mA
Accessories required for table-top version
1
ZT 932-0/24S
1...
ZMF 932-0/24S
1...
ZMF 611-10
Accessories required for table-top version or hollow wall mounting
optionally
1
ZUE 611-KS
1
ZUR 611-01S
1
ZUR 932-1S
1
ZUR 932-2S
1
ZUR 932-3S
1
ZUR 932-4S
1
ZHB 611-0
Accessories required for flush mounted housing
1
GE 611-0
1
GE 611-0
1
GZ 611-1
1
GE 611-0
2
GZ 611-1
1
GE 611-0
3
GZ 611-1
1
GE 611-0
4
GZ 611-1
Table-top accessory
for ZS 932-...
+ MFM 932-5S
Table-top accessory
2 further MFM 932-5S
Table-top accessory
each without
connecting cord
for flush mounting
or table-top mounting
End piece accessory
for ZUR ...
Mounting frame
for ZS 932-3S,
ZS 932-0S
Mounting frame
ZS 932-...
+ 1x MFM 932-5S
Mounting frame
ZS 932-...
+ 2x MFM 932-5S
Mounting frame
ZS 932-...
+ 3x MFM 932-5S
Mounting frame
ZS 932-...
+ 4x MFM 932-5S
Accessory hollow
wall fastener
Flush mounted
for ZUR 611-01S
housing
Flush mounted
for ZUR 932-1S
housing
Flush mounted
for ZUR 932-2S
housing
Flush mounted
for ZUR 932-3S
housing
Flush mounted
for ZUR 932-4S
housing
3
Werbung
